Rust-Oleum Krud Kutter Gloss-Off Prepaint Surface Preparation
Krud Kutter Gloss-Off Pre-paint Surface Preparation is a no rinse, one-step formula is specially designed to prepare high gloss and other hard-to-stick-to surfaces for repainting or refinishing. Specially formulated to help new paint and varnish bond to old finishes, or as a wall preparation prior to wallpapering. It removes dirt, grease, grime, smoke, mildew, food stains, heel marks, crayon, old wallpaper paste, and wax from painted or unpainted wood, metal or vinyl wallpaper. DO NOT USE on porous or non-washable wallpaper. Always test first on surfaces not to be refinished, as it will de-gloss most surfaces.
Features of the product
- Cleans and deglosses without sanding.
- No rinse, one step formula.
- Use on all paints, varnish, lacquer, and polyurethane.
- May be coated over anytime after 10 minutes.
How to Use Krud Kutter Gloss-off Surface Preparation
Do not dilute. Use full strength. Saturate a coarse, lint-free cloth, and apply to surface in a circular motion. Fold and re-saturate cloth frequently. Wipe off with a clean cloth, turning cloth often to avoid smears. When the clean, deglossed surface is dry to the touch (usually about 10 minutes), new finish can be applied. May be coated over any-time after 10 minutes (clean the surface today, re-coat even a week later).
Properties of Krud Kutter Gloss-Off Prepaint Surface Preparation
|Composition||Proprietary Blend of Biodegradable Surfactants,
Detergents and Emulsifiers
|Practical Coverage||200-300 square feet|
CAUTION! SEVERE EYE AND SKIN IRRITANT. In case
of contact with eyes or skin, flush with water for at least
15 minutes. If irritation persists, seek medical attention.
If swallowed, take large amounts of water. Do not induce
vomiting. Get medical attention. KEEP OUT OF REACH
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|