Rust-Oleum FinishKote 80 High Solids Polyaspartic Floor Coating - Part B
FinishKote 80 is a two component, high gloss, UV stable polyaspartic polyurea floor coating for use in industrial and commercial facilities. Suitable for both interior and exterior applications. FinishKote 80 can be used as a clear finish or tinted to finish color.
Features of FinishKote 80 High Solids Polyaspartic Floor Coating - Part B
- Can be applied by spray or roller at temperatures between -20-120 F and in high humidity
- Fast dry coating can be top coated in 4-6 hours
- Provides excellent adhesion to concrete, epoxies, urethanes and polyureas
- Dries to a high gloss, professional finish
How to Apply FinishKote 80 High Solids Polyaspartic Floor Coating Part - B
The concrete surface must be free of all dirt, grease, oil, fats, and other contamination. Remove surface contamination by cleaning with Pure Strength 3599 Industrial Cleaner/Degreaser, detergent, or other suitable cleaner. Rinse thoroughly with clean, fresh water and allowed to dry.
Apply only when air, material and floor temperatures are between -20 - 120Â°F (-29 - 32Â°C). Do not apply in direct Sunlight or when temperature is rising. Immediately after mixing, pour the material onto the floor in a long, 8 to 12 inch wide stripe.
Properties of FinishKote 80 High Solids Polyaspartic Floor Coating - Part B
|Resin Type||Polyaspartic Polyurea|
|Solids By Volume||80%|
|Volatile Organic Compounds||<10 g="" l="" td="">|
|Mixing Ratio||1:1 (Part A to Part B)|
|Induction Time||None required|
|Pot Life||20-25 minutes|
|Practical Coverage at Recommended
|250-350 sq.ft./3.78 Ltr.
Coverage rate can vary depending on the texture
and porosity of the concrete
|Dry Times at 70-80Â°
(21-27Â°C) and 50% RH
|1-2 hours to Tack Free
2-4 hours, 24 hours for vehicle traffic to Dry Hard
4-12 hours* to Re-Coat
|Shelf Life||12 months|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|