Rust-Oleum NeverWet Water Fabric Water Repellent Spray for Outdoors
Rust-Oleum NeverWet Water Fabric Water Repellent Spray for Outdoors
Rust-Oleum NeverWet Fabric Water Repellent Spray is an innovative product to protect your outdoor fabrics from liquids such as water, mud and more without changing their appearance. This product can be used for outdoor patio furniture to stop the damages that take place due to moisture. This waterproofing spray is ideal for cotton, polyester, leather, canvas fabric and suede.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Fabric Water Repellent Spray
- Crystal clear coating which doesn’t change the appearance of clothes.
- Easy to use.
- Stops moisture damages.
- Suitable for cotton, polyester, leather, canvas and more.
NOTE: After application, allow 24 hours to dry before exposing to water.
See How NeverWet Fabric Water Repellent Spray Works
Best Practices to Use NeverWet Fabric Water Repellent Spray
Conditions to Spray: Use outdoors or in a well ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist. Surfaces must be clean and dry.
Application/Spraying: Do not shake. A test spray is recommended to obtain a feel for the spray pattern. Test in an inconspicuous area before application for color fastness. NeverWet Outdoor Fabric may enrich light material with a slightly darker tone. Rotate nozzle to “ON” position. Hold the spray bottle 12-16” from surface and coat the entire object until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame.
Properties of NeverWet Fabric Water Repellent Spray
Brand | NeverWet |
---|---|
Manufacturer | Rust-Oleum |
Resin Type | Acrylic |
Pigment Type | NA |
Solvents | Mineral Spirits |
Weight | 325 ml |
Practical Coverage at Recommended DFT (assumes 15% material loss) |
Coverage will vary depending on fabric. 60 sq.ft. on smooth/light fabrics, 20 sq.ft. on textured/heavy fabrics |
Dry Times at 70-80ºF (21-27ºC) and 50% Relative Humidity |
Varies depending on fabric Allow to dry 24 hours before exposing to water |
Shelf Life | 2 years |
Flash Point | 114°F (45°C) |
Safety Information | For additional information, see MSDS |
Technical Data Sheet | Click here |