Krud Kutter Pre-Paint Cleaner TSP Substitute cleans and de-glosses surfaces prior to painting. It is a ready-to-use, spray on-wipe off formula that cleans and de-glosses surface so paint adheres better. Use on all paints, varnish, lacquer, and polyurethane, or as a wall preparation prior to wallpapering. Removes dirt, grease, grime, smoke, mildew, food stains, heel marks, crayon, old wallpaper paste, and wax from painted or unpainted wood, metal or vinyl wallpaper. Do not use on porous or non-washable wallpaper.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of the product
- Prepares surfaces prior to painting.
- Improves paint adhesion.
- No unpleasant odour.
- No-rinse formula.
How to Use Krud Kutter Pre-Paint Cleaner / TSP Substitute
Always pre-test before use. Do not dilute. Use full strength. Pre-moisten rag, cloth, or sponge with Pre-Paint Cleaner. Spray directly on surface, and blot away any overspray immediately. Apply pre-moistened cloth to surface in a circular motion. Wipe off with a clean cloth, turning often to avoid smears. When the clean, de-glossed surface is dry to the touch (usually about 10 minutes), new paint finish can be applied. Repaint when dry, or within a week, before soiled again.
Properties of Krud Kutter Pre-Paint Cleaner / TSP Substitute
|Composition||Proprietary Blend of Biodegradable Surfactants, Detergents and Emulsifiers|
|Practical Coverage||50-75 square feet|
CAUTION! EYE AND SKIN IRRITANT. In case of contact with eyes or skin, flush with
water for at least 15 minutes. If irritation persists, seek medical attention.
If swallowed, take large amounts of water. Do not induce vomiting. Get medical
attention. KEEP OUT OF REACH OF CHILDREN.
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|