Rust-Oleum Krud Kutter Parts Washer
Krud Kutter Parts Washer is formulated with Prevent-X™ Corrosion Inhibitor to resist future corrosion, rust and oxidation caused by the elements. An industrial strength, aqueous solution it is a safe alternative to hazardous cleaning chemicals such as mineral spirits and other solvents.
This multi-purpose formula is designed to be used in immersion, ultrasonic, manual, and spray applications. Can be used on aluminum, copper, carbon steel, acrylic, vinyl, stainless steel, iron, tin, titanium, brass, bronze, plastic, rubber, powder coated surfaces and more. It safely and effectively removes grease, grime, oils, carbon, ink and other organic deposits.
How to Use Parts Washer
IMMERSION PARTS CLEANER DIRECTIONS: Pour cleaner into your container to the desired level, based on the amount of parts to be cleaned. Immerse parts to be cleaned in the solution. Cleaning time will depend on type and thickness of soils, and will vary from minutes to overnight. To determine if items have been cleaned, periodically lift parts out of container. It may be necessary to remove heavy soils with a wire brush or scrub pad, and this can be done over the dipping container or separate container. Once complete, the soils will separate from the parts and may float to the top of the container. An oil skimmer is suggested such as a floating absorber and should be changed periodically. Final cleanup can be completed by using compressed air or water wash.
SPRAY/MANUAL DIRECTIONS: Can also be used to clean heavy equipment on site. For heavy soils apply full strength with a pump sprayer or manual application. For light to medium soils dilute the product 1 to 10 (12 oz. of concentrate to 1 gallon of water), or run full strength through a pressure washer chemical injector or reservoir tank. Allow cleaner to penetrate soils for 5-10 minutes and wash off. Contains anti-corrosive agents to safeguard pressure washer parts.
Properties of Krud Kutter Parts Washer Cleaner/Degreaser
|Composition||Proprietary Ingredients in a Water-based Solution|
|Solids by Weight||7.5%|
|Practical Coverage||Light/Medium Soils (10 to 1) 1-Gallon – 2,200-3,300
square feet Light/Medium Soils (10 to 1) 5-Gallon – 11,000-16,500 square feet
|Flash Point||>200°F (93°C)|
CAUTION! EYE AND SKIN IRRITANT. In case of contact with eyes or skin, flush with
water for at least 15 minutes. If irritation persists, seek medical attention.
If swallowed, take large amounts of water. Do not induce vomiting. Get medical
attention. KEEP OUT OF REACH OF CHILDREN.
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|