Krud Kutter Graffiti Remover is biodegradable and has no unpleasant odor! This product is manufactured to remove spray paint, enamel, lacquer, permanent marker, shoe dye, and more from several surface. This graffiti remover is safe to use on metals, steels, concrete, brick, tile, glass, plastic, stucco, vinyl, cinder blocks, alloys etc. This chemical doesn’t alter clear finishes on automotive. As per the technical data sheet from manufacturer, it is possible to treat 50-75 square feet of area with one liter.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Krud Kutter Graffiti Remover
- Easy to use.
- Woks on porous and non-porous surface.
- Earth friendly.
- Suitable to use for glass and fiberglass.
NOTE: For best result, leave the chemical for 5 minutes on the area.
Soft Surface (Signs & Vinyl): Thoroughly spray area damaged by graffiti and wait 3-5 minutes. Wipe off with a clean cloth or towel. Repeat if necessary.
Non-porous Surface: Thoroughly spray area damaged by graffiti and wait 5-10 minutes. Use a brush to agitate and loosen graffiti. Hose off with water or use pressure washer. Repeat if necessary.
Properties of Krud Kutter Graffiti Remover
|Composition||Proprietary Blend of Biodegradable Surfactants, Detergents and Emulsifiers|
|Weight||946 ml and 3.78 Ltr.|
|Practical Coverage||50-75 square feet per liter|
|Flash Point||200°F (93°C)|
WARNING: MAY BE HARMFUL IF INHALED, ABSORBED THROUGH
THE SKIN OR SWALLOWED. Mist or vapors may be irritating to the eyes, nose, throat
and lungs. In case of contact with eyes or skin, flush with water for
persists, seek medical attention. If swallowed, take large amounts of water.
Do not at least 15 minutes. If irritation induce vomiting. Get medical attention.
KEEP OUT OF REACH OF CHILDREN.
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|