Try a industrial, modern, metallic look on your next project. Rust-Oleum Universal Aged Metallic Spray Paint is a paint and primer in one that provides superior coverage and durability on any surface and at any angle—with the unmatched comfort of our patented trigger technology.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Aged Metallic Spray

For use on interior / exterior environments.
One Universal coating for diverse substrates.
Ultimate flexibility for extreme applications.
Maximum adhesion for demanding substrates.
Fast, efficient coverage.
Fade and chip resistant.
Rust Preventive

Featured Video for Universal Aged Metallic Spray Paint

How to Use Aged Metallic Spray

Appropriate Conditions to Use

Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90ºF (10- 32ºC) and humidity is below 65% to ensure proper drying. Do not use on objects that may exceed 200ºF (93ºC) surface temperature. Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation

Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.

Application / Spraying

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Prior to use, slide off the red safety clip from the trigger. Hold can upright 8-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more moderate coats at moderate speed to avoid drips and runs. Do not use near open flame.

Properties of Universal Aged Metallic Spray Paint

Properties	Weathered Steel	Metallic Rust
Brand	Universal
Manufacturer	Rust-Oleum
Weight	312 Grams
Resin Type	Alkyd Modified Hydrocarbon Resin	Modified Alkyd
Pigment Type	Aluminum	Varies with Color
Solvents	N-Butyl Acetate, VM&P Naphtha, Xylene	Acetone, Ketone blend
Recommended Dry Film Thickness (DFT) per Coat	1.0-2.0 mils (25-50µ)	1.0-2.0 mils (25-50µ)
Practical Coverage at Recommended DFT (assumes 15% material loss)	10-15 sq. ft./can
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity	30 minutes to touch. Recoat with an hour or after 48
Dry Heat Resistance	200ºF (94ºC)
Shelf Life	5 Years
SFlash Point	-156ºF (-104ºC)
Safety Information	MSDS
Technical Data Sheet	Click here	Click here

Rust-Oleum Universal Aged Metallic Spray Paint

Available Options

Have a question?