Stops Rust Textured Spray Paint is perfect to use for railings, chairs, tables, light fixtures, swing sets, tool chests etc. This product is ideal to use for metal, wood, concrete, masonry. Rust-Oleum Stops Rust Textured Aerosol Spray are designed to provide a durable protective coating with excellent resistance to rust, and excellent resistance to abrasion, fading, chipping, and dulling. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish. Rust-Oleum Stops Rust Textured Sprays are ideal for outdoor metal surfaces. These sprays feature a comfort tip with a wider finger pad to reduce fatigue caused by continuous spraying. Not for use on galvanized metal.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of textured spray

Upscale Finish.
Indoor/outdoor.
Durable, corrosion-resistant.

How to Use Stops Rust Textured Spray Paint

Appropriate Conditions to Spray

Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Make Your Surface Ideal to Paint

Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.

Spraying/Paint

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.

NOTE: Download the Technical Data Sheet for more information about the product.

Properties of Stops Rust Textured Aerosol Paint

Brand	STOPS RUST
Manufacturer	Rust-Oleum
Resin Type	Solvent Acrylic
Pigment Type	Varies with color
Solvents	Acetone, Toluene, Xylene
Weight	340 Grams
Recommended Dry Film Thickness (DFT) Per Coat	1.0-2.0 mils (25-50µ)
Practical Coverage at Recommended DFT	10-12 sq. ft./can
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity	15 minutes to touch. Re-coat: Apply a second coat or clear coat within 1 hour or after 48 hours
Dry Heat Resistance	200°F (93°C)
Shelf Life	5 years
Flash Point	-156°F (-104°C)
Safety Information	For additional information, see MSDS
Technical Data Sheet	Click here

Rust-Oleum Stops Rust Textured Paint - Aerosol Spray with Ideas And Tips

Available Options

Have a question?