Rust-Oleum Stops Rust Metallic Aerosol Spray Paint

Application of Stops Rust Metallic Spray Paint is very versatile! Specialties that make it versatile are interior/exterior durability, weather-resistant, rust resistant, suitable for wood and metal etc. This aerosol paint is not available only in metallic finishes like gold, silver, copper; it is also available in general colors such as black, cobalt blue, green etc. You can use it to paint the body of car or bike, railings, doors etc. This can be used for decoration also as available in eye-catching colors.

Features of Stops Rust Metallic Spray Paint

• Provide excellent resistance to abrasion, fading, and chipping.
• Resist heat up to 93°C.
• Becomes much more durable when used with primer.
• Suitable for numerous jobs.

NOTE: It is suggested to read and follow the usage instructions to get best output.

How to Use Rust-Oleum Stops Rust Metallic Spray Paint

Ideal Environmental Conditions

Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation

Use original krud kutter to remove all dirt, grease, oil, salt and chemical contaminants or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.

Spraying/Application

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.