Rust-Oleum Specialty Night Glow Spray Paint is manufactured to create glowing effect on wood, metal, plastic and drywall. After being charges, this paint will create glowing effect that will remain for 4-8 hours. This night glow spray paint is great for great for all kinds of projects from kids’ rooms, garages, crafts and even holiday décor. This spray paint is ideal for interior and exterior surroundings. 8-10 square feet of area can be treated with one aerosol spray cane. This modified alkyd formula dries in 10-15 minutes to touch.
Features of Glow In The Dark Spray Paint
- Available in aerosol spray cane which makes it easy to use.
- Efficient coverage.
- Ideal for interior and exterior.
- Glows for long after charging.
- Fast drying.
NOTE: It requires charging before glowing.
How to Apply Rust-Oleum Specialty Glow In the Dark Spray Paint?
Conditions to Spray
Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90ºF (10- 32ºC) and humidity is below 65% to ensure proper drying.Do not apply to surfaces that, when heated, exceed 200°F (93°C) or galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Wash the surface with a commercial detergent, or other suitable cleaning method to remove dirt. Rinse with fresh water and dry with a clean cloth. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.
Application / Spraying
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Make sure to apply paint to the reverse side of glass that will be displayed. Hold can upright 10-16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more coats a few minutes apart. Do not use near open flame.
Properties of Rust-Oleum Night Glow Spray Paint
|Resin Type||Modified Alkyd|
|Pigment Type||Strontium Oxide Aluminate|
|Practical Coverage at Recommended
DFT (assumes 15% material loss)
|Dry Times at 70-80ºF
(21-27ºC) and 50%
|15 minutes to touch and 24 hours to fully dry|
|Shelf Life||5 years|
|Flash Point||-156°F (-104°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|