Rust-Oleum Watco Teak Oil for Exterior Wood (UV & Moisture Resistant)
Rust-Oleum Watco Teak Oil for Exterior Wood (UV & Moisture Resistant) - 946 Ml
Rust-Oleum Watco Teak Oil for Exterior Wood (UV & Moisture Resistant) - 3.78 Ltr.

Rust-Oleum Watco Teak Oil for Exterior Wood (UV & Moisture Resistant)

Regular price Rs. 5,650.00 Sale

Watco Teak Oil is made for providing ultra violet and moisture resistance to teak wood, rosewood, mahogany and more. Teak Oil penetrates into wooden pores and takeout the rich, warm and hand-rubbed finish. This is compatible to use with indoor and outdoor surfaces. This Oil Finish is now available in an easy-to-use foam. The foam formulation is ideal for vertical applications. No runs, drips or mess. Simply apply the foam and rub in.

Features of Teak Oil

  • Ideal for exotic hardwoods like teak, rosewood and mahogany.
  • Excellent coverage, no brush marks.
  • Excellent for marine use above the waterline.
  • For indoor and outdoor use, will not crack, chip or peel.
  • Compatible to use via wiping, spraying & brushing.

NOTE: It is recommended to use above water line surface.

How to Apply Teak Oil?

Previously Finished Surfaces

For best results, surfaces must be clean, dry, and free of old finishes, dust, dirt, oils, or foreign matter. Old finishes in poor condition must be removed. Sand to obtain a smooth surface. Remove all sanding dust using a vacuum or cloth dampened with mineral spirits.

Unfinished Surface Preparation

Sand using 150-220 grit sandpaper and remove all sanding dust using a rag dampened with mineral spirits, or vacuum. If a filler or putty is used, make sure that it does not contain wax and allow enough time to dry thoroughly.


Brush : Stir or invert can several times before and during use. Do Not Shake. Flood surface and work into wood with a lint free cotton/poly rag or high quality brush. Allow finish to dry minimum of 30 minutes before re-coating. Lower temperatures and/or higher humidity may cause slower dry times. Apply additional coats every 15 minutes. Wipe surface thoroughly with a clean lint free cloth to remove excess oil from the surface. Allow finish to dry 12 hours before light use.

Properties of Watco Teak Oil

Brand Watco
Manufacturer Rust-Oleum
Resin Type Oil- Phenolic Rosin Ester
Pigment Type NA
Solvents Mineral Spirits
Weight 946 ml and 3.78 Ltr.
Volatile Organic Compounds 434 g/l (3.62 lbs. /gal.)
Dry Times at 70-80°F
(21-27°C) and 50% RH
8 hours to Take Free
10 hours to Handle
30 minutes to Re-coat
Dry Heat Resistance 212°F (100°F)
Shelf Life 3 years
Flash Point 106°F (41°C) Seta flash
Safety Information For additional information, see MSDS
Technical Data Sheet Click here