Rust-Oleum Zinsser Bulls Eye 1-2-3 Deep Tint Water-Base Primer

Rust-Oleum Zinsser Bulls Eye 1-2-3 Deep Tint Water-Base Primer

Regular price Rs. 2,650.00 Sale

Zinsser Bulls-Eye 1-2-3 Deep Tint is a white pigmented, styrenated acrylic water- base deep-tint capable primersealer stain blocker and bond coat designed for priming all surfaces. Apply to interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces. Bulls-Eye 1-2-3 Deep Tint bonds to wood, plaster, concrete, gloss enamels, hardboard, glass and tile. It provides a rust inhibitive coating on iron railings, steel frames, piping, etc. It resists the growth of mold and mildew in damp, humid environments. It resists high pH surfaces (up to 12.5) and seals most porous surfaces. Bulls-Eye 1-2-3 Deep Tint traps most stains in the primer film including graffiti, grease, rust, cedar and redwood tannin, creosote, and asphalt stains.


Features of Zinsser Bulls Eye 1-2-3 Deep Tint Water Base Primer


  • Tintable to mid-tone and deep-tone colors
  • Hides bright colors and patterns in one coat
  • Improves hide and coverage of dark color topcoats
  • Rust Inhibitive – may be used to prime ferrous metal
  • Dried film is mold and mildew resistant
  • May be applied to high pH surfaces (up to 12.5)
  • Dries in minutes, can be recoated in 1 hour

How to Apply Zinsser Bulls Eye 1-2-3 Deep Tint Water Base Primer


Surface Preparation


Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper, adhesive or any contamination that may interfere with adhesion. If unsure of cleanliness, always wash surface with an appropriate ammoniated cleaning solution or solvent (do not use TSP as a cleaner). Remove any peeling and/or unsound coatings. Sand any remaining paint film edges smooth with the surface. Lightly sand exposed exterior wood with 80 to 100 grit sandpaper to remove loose or weathered wood fibers and mill glaze. When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.


Application


Apply only when air, material, and surface temperatures are between 50-90ºF (10-32ºC) and the surface temperature is at least 5ºF (3ºC) above the dew point. The relative humidity should not be greater than 85%. Mix thoroughly to ensure any settled pigment is re-dispersed before using. In most cases only one coat is necessary to prime most surfaces. If excessive absorption occurs over very porous substrates a second coat may be necessary. Spot priming is recommended only under high-hiding topcoat paints. For best results, prime entire surface before painting. Apply with a natural or synthetic bristle brush, roller, pad or sprayer. Follow manufacturer's instructions when using spray equipment. For airless spraying, use a .017" tip at 2000 to 2500 P.S.I.

Properties of Rust-Oleum Zinsser Bulls Eye 1-2-3 Deep Tint Water-Base Primer


Brand Rust-Oleum Zinsser
Manufacturer Rust-Oleum
Resin Type Styrenated Acrylic
Pigment Type Titanium Dioxide
Solvents Glycol Ethers, Water G
Weight 3.78 Ltr.
Volatile Organic Compounds <100 g/l (0.83 lbs./gal.)
Recommended Dry Film
Thickness (DFT) per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT
(Unthinned material)
3.0-6.0 mils
(75-150µ)
Practical Coverage at Recommended
DFT (assume 15% material loss)
450 sq.ft./gal. (11.1 m2/l) non-porous
350 sq.ft./gal. (8.6 m2/l) porous
Dry Times at 70-80°
(21-27°C) and 50% RH
35 minutes to Touch
1 hour to Re-Coat
2 hours (24 hours over cedar) to Stain Sealing
7 days to Full Hardness
Shelf Life 5 years
Flame Spread (ASTM-84-97A) 5, Class 1
Smoke Contribution (ASTM-84-97A 0, Class 1
Flash Point >200ºF (93ºC)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here