Wipe New ReColor Renews & Restores Plastic, Vinyl, Furniture, Metal

Wipe New ReColor Renews & Restores Plastic, Vinyl, Furniture, Metal

Regular price Rs. 2,150.00 Sale

"

Say ""No"" to paints, roller, brushes, sanding paper, and stain remover for renewing & restoring because Rust-Oleum Wipe New Recolor is available now! This is an excellent product to restore plastic, vinyl, metal, stone and other surfaces. Kit contains 59 ml Recolor liquid, 3 micro fiber cloths, 1 micro fiber sponge, 1 detail brush, and a pair of nitrile gloves. This innovative product has a feature which offers protection to surface from UV rays, sun, water damage and more. This polymer formula penetrates into the surface to protect and renew for long. Ideal to restore shutters, patio furniture & grills, window trims, metal railings and hardware, garden accessories, lighting fixtures, mailboxes, kayaks, golf crafts etc.

Featured Video of Rust-Oleum Wipe New ReColor




How to Renew & Restore with Wipe New Recolor?


Surface Preparation


To maximize coverage area, it is important to prep all surfaces intended for application at the same time before opening ReColor. Clean all surfaces intended for application at the same time and allow them to dry completely prior to application of ReColor.


Plastic/Vinyl/Leather/Stone : Wash with soap and water or a mild degreaser and scrub with a brush to get ingrained dirt out of all the tight areas. Make sure the brush is appropriate for cleaning the surface without damage. If the surface has been treated before with waxes, conditioners, or silicon-based products, then use a degreaser to remove all remnants of the previously used products.


Metal : : New metal surfaces that are being coated for corrosion protection can be wiped down with a dry rag to remove dust prior to application of ReColor. Most metallic surfaces that have been exposed to the environment will need to be washed with soap and water or a mild degreaser and scrubbed with a brush to get ingrained dirt out of all the tight areas. Non-painted metallic surfaces that have been exposed to the outdoors and have a bit of surface mineralization (ex: brass, zinc, stainless steel surfaces, etc.) can be washed and dried with soap and water and then further prepared with a light scrubbing from steel wool to remove the surface mineralization. For best results, do a final wipe down using an acetone saturated microfiber cloth to remove all remaining residue


Application


Use when temperatures are between 40°F and 90°F (4°C and 32°C). Use in well ventilated and covered areas away from the sun. Do not apply Wipe New to hot surfaces or in direct sunlight. Ensure surface is clean, dry and cool to ambient temperature before applying Wipe New.


Ensure you are in a well ventilated area and the surface intended for application is completely dry. Put on the chemical resistant gloves and tear open the Wipe-It packet. Apply by wiping onto the intended surface with slight overlap, from one row to the next (like mowing a lawn) until the surface is completely coated. Once the Wipe-It starts to become dry, use the ReColor bottle for resaturation. With the cap still affixed, shake the bottle of ReColor for 10 seconds prior to opening. Slowly and carefully, pour ReColor onto the applicator cloth until saturated but not dripping. Aim to mimic the saturation level of the previously used Wipe-It

Properties of Wipe New Recolor


Brand Rust-Oleum Wipe New
Manufacturer Rust-Oleum
Resin Type Siloxane Polymer
Pigment Type NA
Solvents Parachlorobenzotrifluoride

California - N-Butyl Acetate,Parachlorobenzotrifluoride G
Volatile Organic Compounds None
Practical Coverage One Wipe New ReColor kit covers up to 100 square feet
Dry Times at 70-80°
(21-27°C) and 50% RH
1 hour to Touch
15 minutes to Re-Coat
24 hours to Full Care
Shelf Life 5 years
Flash Point 56°F (13°C)

California: 92°F (33°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here
"