Rust-Oleum Watco Satin Finishing Wax
Rust-Oleum Watco Satin Finishing Wax - Natural
Rust-Oleum Watco Satin Finishing Wax - Dark

Rust-Oleum Watco Satin Finishing Wax

Regular price Rs. 2,270.00 Sale

Watco Satin Wax is a liquid solvent-based wax that leaves a rich, soft satin luster while providing an additional level of protection and water resistance to oil-finished or bare woods. Use Watco Natural Satin Wax for light-colored woods and the Dark Stain Wax for dark-colored woods, or mix them for a medium toned wax. Satin Wax is recommended is suitable for use on furniture, trim, paneling, or any interior bare or oil-finished wood surface. It is NOT recommended for floors or exterior surfaces.


Features of Watco Satin Finishing Wax


  • Formulated for bare or oil-finished woods
  • Provides an extra level of protection
  • Wipe-on and buff off
  • How to Apply Watco Satin Finishing Wax


    Surface Preparation


    Allow any previously applied oil or stain on wood surface to dry 72 hours before applying WatcoSatin Wax for Finishing.


    For unfinished bare wood surfaces, sand using 150-220 grit sandpaper and remove all sanding dust with a vacuum or a rag dampened with mineral spirits. If a filler or putty is used, make sure it does not contain wax and allow for enough time to dry thoroughly.


    Application


    Use only when air (ambient) temperature is between 60-90°F (16-32°C) and relative humidity is below 85%. Allow for longer dry times during damp and humid conditions. Mix material thoroughly before application. Stir occasionally during use. Spread a thin, even coat of Watco Satin Wax with a clean cloth. Wait 10 minutes, wipe clean and dry. Polish with a soft cloth.

    Properties of Watco Satin Finishing Wax


    Brand Watco
    Manufacturer Rust-Oleum
    Resin Type Hydrocarbon Wax
    Pigment Type None
    Solvents Light Petroleum Distillate
    Weight 946 ml
    Volatile Organic Compounds 722-744 g/l
    Recommended Dry Film
    Thickness (DFT) Per Coat
    NA
    Wet Film to Achieve DFT
    (unthinned material)
    NA
    Dry Times at 70-80°F
    (21-27°C) and 50% RH
    30 minutes to Touch
    30 minutes to Handle
    72 hours to Re-Coat
    Shelf Life 3 years
    Flash Point >93°F (34°C)
    Safety Information For additional information, see MSDS
    Technical Data Sheet Click here