Rust-Oleum Varathane Wood Refresher
Product Code: 247831
Availability:Out of stock
Have a question?
Varathane Wood Refresher restores and renew wood surfaces that have become dull, faded or show signs of wear. It offers a clear protective coat on any wood surface including solid wood floors that have been previously coated with a polyurethane, shellac or lacquer finish. If can also be used on laminate floor when first treated with Varathane No Sanding Refinishing Prep.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Varathane Wood Refresher
- Rejuvenates hardwood, factory and laminate floors without sanding
- Quick, easy solution to completely refinishing a floor
- Beautifies and adds luster to all wood floors
- Provides a clear, hard protective finish
How to Apply Varathane Wood Refresher
Surface Preparation
Remove any loose dirt or dust using a damp rag. While Varathane Wood Refresher is compatible with all types of previously finished surfaces, it is not compatible with wax. To test the surface for wax, dampen a rag with mineral spirits and wipe it on the surface. If the rag pulls up a waxy substance, then the surface contains wax. To remove and dissolve the wax from the surface, dampen a rag with mineral spirits and wipe the surface until clean.
Application
Working in small sections (4x4 feet), apply in a Z pattern using a painting pad or foam style mop. Spread the Wood Refresher evenly working in the direction of the grain. Keep working in 4x4 foot sections until the entire floor is completed.
Allow the Wood Refresher to dry for 2-4 hours before applying a second coat.
Laminate Floors – Varathane No Sanding Refinishing Prep is required if you are planning to apply Varathane Wood Refresher to laminate floors.
Properties of Varathane Wood Refresher
Brand | Varathane |
---|---|
Manufacturer | Rust-Oleum |
Resin Type | Acrylic Emulsion, Polyurethane Dispersion |
Solvents | Glycol Ether and Water |
Weight | 946 ml |
Volatile Organic Compounds | <140 g/l (1.16 lbs./gal.) |
Recommended Dry Film Thickness (DFT) Per Coat |
1.0-1.5 mils (25-37.5µ) |
Wet Film to Achieve DFT (unthinned material) |
5.0-8.0 mils (125-200µ) |
Dry Times at 70-80°F (21-27°C) and 50% RH |
1-2 hours to Touch 2-4 hours to Topcoat 24 hours to Fully Dry |
Shelf Life | 3 years |
Flash Point | >200°F (93°C) |
Safety Information | For additional information, see MSDS |
Technical Data Sheet | Click here |