Varathane Triple Thick Polyurethane is 3X thicker than a traditional polyurethane. It is an advanced self leveling formula that allows projects to be completed in one coat. This water-based formula provides excellent scratch and stain resistance. It also provides fast dry times as well as the convenience of soap and water clean-up. It is suitable for use on all interior wood surfaces including furniture, doors, trim and more. This product is not recommended for outdoor surfaces or floors.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of the Product

Advanced self-leveling formula.
Complete projects 3x faster.
Ultimate durability in one coat.
Soap and water clean-up (brush format) .

How to Apply Water-Based Triple Thick Polyurethane for Interior

Surface Preparation

Surface must be clean, dry and free from wax, grease, dust and other contaminants. Sand area smooth, progressing with sandpaper from 120 to 220 grit. Vacuum the surface to remove dust. Wipe surface with a clean, lintfree cloth.

Application

Stir before using or if product has been sitting longer than one hour. Do not shake. Use adequate ventilation at all times. Apply only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Apply using a high quality synthetic bristle brush. Apply in the direction of the wood grain in one, thick smooth uniform coat. If refinishing a previously coated surface or a second coat is desired, sand with 220 grit sandpaper.

Properties of Varathane Water Based Triple Thick Polyurethane for Interior

Brand	Varathane
Manufacturer	Rust-Oleum
Resin Type	Polyurethane/Acrylic
Pigment Type	Inorganic
Solvents	Glycol Ethers and Water
Weight	946 ml
Volatile Organic Compounds	275 g/l 2.28 lbs./gal.
Practical Coverage at Recommended DFT (assumes 15% material loss)	50 sq.ft./quart
Wet Film to Achieve DFT (unthinned material)	9 mils (225µ)
Recommended Dry Film Thickness (DFT) Per Coat	3 mil (75µ)
Dry Times at 70-80°F (21-27°C) and 50% RH	2 hours to Touch 2 hours to Re-Coat 48 hours to Handle 7 days to Full Care
Shelf Life	3 years
Flash Point	>200°F (93°C)
Safety Information	For additional information, see MSDS
Technical Data Sheet	Click here

Rust-Oleum Varathane Water-Based Triple Thick Polyurethane for Interior - 946 ml

Have a question?