Rust-Oleum Varathane Premium Wood Stains are ideal to use for all interior wooden projects. This product can be used to satin wood furniture, cabinets, doors, rims, paneling and more. This premium formula is needed one coat only to stain the wood. As per the technical data sheet from Rust-Oleum, it is possible to treat 120-150 square feet of area but is also depends on porosity of wood.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Premium Wood Stains

Clear Soya oil provides rich, truer colors and ultra-deep penetration.
Premium Pigments. Color-rich translucent pigments penetrate deep into the wood, enhancing natural grain detail.
Better Color Choices. Varathane offers the best array of colors, from traditional to contemporary.
Even application. Varathane applies evenly without blotching. No constant stirring or remixing needed.

NOTE: For best result, stir thoroughly. Wood Gel Stain is also available

How to Apply Varathane Premium Wood Stains?

Surface Preparation

Remove any existing finishes with sandpaper or stripper. Prepare bare wood for staining by sanding in the direction of the grain. Begin with 120 grit sandpaper and progress though 150, 180 and 220 grits.

Before staining, remove all sanding dust and dirt with a vacuum, tack cloth, or rag dampened with mineral spirits. For grease or glue, remove with a clean rag dampened with mineral spirits. Soft woods such as pine, fir, or maple require a wood conditioner. Use Varathane Premium Wood Conditioner before staining.

Application

Use only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Stir the contents thoroughly to ensure any settled pigment is re-dispersed before application. Apply with a brush or clean, lint-free cloth. Apply the stain across the grain until the wood is saturated on top. Wipe the excess stain off in the direction of the wood grain. Do not let the stain dry before wiping off the excess. A second coat can be applied after 2 hours. Do not sand between stain coats.

Properties of Varathane Premium Wood Stains

Brand	Varathane
Manufacturer	Rust-Oleum
Resin Type	Urethane Modified Alkyd
Pigment Type	Inorganic Pigments
Solvents	Mineral Spirits
Weight	236ml, 946 ml and 3.78 Ltr
Volatile Organic Compounds	<550 g/l (4.5 lbs./gal.)
Recommended Dry Film Thickness (DFT) Per Coat	0.5-1.0 mils (12.5-25µ)
Wet Film to Achieve DFT (unthinned material)	1.5-3.0 mils (37.5-76µ)
Dry Times at 70-80°F (21-27°C) and 50% RH	1-2 hours to Touch 2 hours to Handle 2 hours to Re-coat
Shelf Life	3 years
Flash Point	105°F (41°C)
Safety Information	For additional information, see MSDS
Technical Data Sheet	Click here

Rust-Oleum Varathane Premium Wood Stains

Available Options

Have a question?