Rust-Oleum Stops Rust Universal Bonding Primer is particularly made to provide top coat adhesion to the surface where it is difficult to paint. It is manufactured to use on galvanized steel, wood, masonry, metal, porcelain, glazed brick, fiber glass, steel and other surface. This primer spray is compatible with interior and exterior environment. The dry time of universal aerosol primer is 30 minutes (to touch) and you can apply second coat any time. It is possible to paint 10-12 square feet of area with one spray cane.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Stops Rust Universal Bonding Primer Spray
- Interior and exterior durability.
- Made with Stops Rust technology.
- Fast drying.
- Suitable to use for any surface.
NOTE: Apply two light coats with the gap of few minutes.
Featured Video of Stops Rust Universal Bonding Primer
How to Apply Stops Rust Universal Bonding Primer Spray?
Wash the surface with a commercial detergent, or other suitable cleaning method to remove dirt. Rinse with fresh water and let dry. Remove all oil, grease, wax and petroleum based materials with mineral spirits. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying. Apply 2 or more light coats a few minutes apart. Do not use near open flame.
Properties of Stops Rust Universal Bonding Primer Spray
|Brand||Rust-Oleum Stops Rust|
|Pigment Type||Titanium Dioxide, Limestone|
|Solvents||Acetone, Methyl Ethyl Ketone, Methyl Isobutyl Ketone|
|Fill Weight||12 ounces|
|Recommended Dry Film
Thickness (DFT) Per Coat
|1.5-2.5 mils (37.5-62.5µ)|
|Dry Times at 70-80°F
(21-27°C) and 50% RH
|30 minutes to Touch
1 hour to Handle
Apply a second coat or topcoat anytime to Re-Coat
|Dry Heat Resistance||200°F (93°C)|
|Shelf Life||5 Years|
|Flash Point||-156°F (-104°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|