Rust-Oleum Specialty Reflective Finish Spray illuminates painted surfaces under direct headlights for nighttime visibility and safety. Apply to metal, wood, plastic, concrete or masonry.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of the Product
- Semi-transparent finish.
- Great for mailboxes, gates and trash cans.
How to Apply Specialty Reflective Finish Spray
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. IMPORTANT! Shake can approximately 4 seconds for every 15 seconds of use. Hold can upright 10-16" from surface and spray in a steady backand-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Keep the can the same distance from the surface. Apply 2-3 light coats 1-2 minutes apart. DO NOT APPLY HEAVY COATS THAT LOOK WET. The effect works best when light coats are applied. Do not use near open flame.
Properties of Specialty Reflective Finish Spray
|Resin Type||Modified Alkyd|
|Pigment Type||Varies with color|
|Solvent||Acetone, Aromatic Hydrocarbons, Toluene|
Practical Coverage at Recommended
Approximately 4-5 sq.ft./can
Dry Times at 70-80°F(21-27°C) and
1-3 hours to Touch
5-9 hours to Handle
24 hours to Fully Dry
|Dry Heat Resistance||200°F (93°C)|
|Shelf Life||5 years|
|Flash Point||-156°F (-104°C)|
|Technical Data Sheet||Click here|