Rustoleum Specialty Metallic - Gold - Silver Spray Paint
Rustoleum Specialty Metallic Spray Paint - Gold
Rustoleum Specialty Metallic Spray Paint - Silver
Rustoleum Specialty Metallic Spray Paint - Brass
Rustoleum Specialty Metallic Spray Paint - Copper

Rustoleum Specialty Metallic - Gold - Silver Spray Paint

Regular price Rs. 640.00 Sale

Give a swanky look to your interior projects with Rust-Oleum Specialty Metallic Spray Paint. This is best to replicate the look of gold, silver, brass and copper. This aerosol paint is manufactured for interior decoration there it is not recommended to use for exterior. A one whose job is related to decoration of fancy items like flower pot holders, jugs, wooden or metallic frames; will be satisfied after using this. This can be used for wood, metal, plaster, masonry, unglazed ceramic and more.

Features of Specialty Metallic Spray Paint

  • Splendid metallic shine.
  • Available in aerosol cane which makes it convenient for touch-up jobs.
  • Enables to complete the job in short instance as it dries fast.
  • Ideal for numerous surface.

NOTE: Use the paint with spray grip for more convenience.

Featured Video of Rustoleum Specialty Metallic Gold Spray

Check our YouTube Channel for more videos.

Best Practices to Use Rust-Oleum Specialty Metallic Spray Paint

Ideal Conditions to Use: Use outdoors or in a well ventilated area. Use when temperature is between 50-90°F (10-32°C) and humidity is below 85% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation for Best Result: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.

Application / Spraying Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Hold can upright 10- 16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Keep the can the same distance from the surface. Apply two or more light coats a few minutes apart to avoid drips and runs. Metallic sprays are not recommended for outdoor use. Do not use near open flame.

Properties of Rust-Oleum Specialty Metallic Spray Paint

Manufacturer Rust-Oleum
Resin Type Solvent Acrylic
Pigment Type Varies with color
Solvents Acetone, Toluene, Xylene
Weight 312 Grams
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 10-12 sq.ft./can
Dry Times at 70-80ºF
(21-27ºC) and 50%
Relative Humidity
15 minutes and re-coat within
1 or after 24 hours
Dry Heat Resistance 200°F (93°C)
Shelf Life 5 years
Flash Point >-156°F (-104°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here