Rust-Oleum Clear Dry Erase is a smooth, hard finish that creates a unique writeable-erasable surface. Apply over any color to create your own custom dry erase board. Once dry, simply use any dry erase markers to draw or write messages and then erase. Clear Dry Erase is suitable for use on interior surfaces such as drywall, wood and metal.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Specialty Dry Erase Paint
- Clear writeable-erasable finish
- Low odor formula, safe for indoor use
- Can be applied to a variety of surfaces including drywall, masonite, wood, concrete and more
Featured Video of Rust-Oleum Specialty Dry Erase Paint
How to Apply Specialty Dry Erase Paint
Surfaces must be clean, dry, and free of dirt, grease and oil. Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with detergent and water or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry. Lightly sand the surface that is to be painted. Remove dust from sanding with a lint-free cloth.
Apply only when air and surface temperatures are between 50-90ºF (10-32ºC) and the relative humidity is below 85% to ensure proper drying. With painter’s tape, tape around the area you wish to paint before beginning. Pour paint into a paint tray. Use a dense foam roller that is designed to give a smooth finish. For smaller surfaces, use a foam brush. Results in a high gloss finish.
Properties of Stops Rust Specialty Dry Erase Paint
|Resin Type||Polyamine Epoxy Blend|
|Solvents||Water, Glycol Ethers|
|Volatile Organic Compounds||45 g/l (0.37 lbs./gal.)|
|Recommended Dry Film
Thickness (DFT) Per Coat
|Wet Film to Achieve DFT
|Mixing Ratio||3:1 Base to Activator by volume
(12 ounces of Part B to 4 ounces of Part A)
|Pot Life||Up to 90 minutes|
|Dry Times at 70-80°F
(21-27°C) and 50% RH
|3-4 hours to Touch
5-6 hours to Re-Coat
3 days to Full Care
|Shelf Life||2 years unopened containers|
|Flash Point||>200°F (93°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|