302590 302590 Specialty

Rust-Oleum Specialty Chalked Spray Paint - Ultra Matte Finish

Product Code: 302590

Availability:Out of stock

Rust-Oleum Chalked Ultra Matte Sprays create an ultra matte finish with excellent coverage and adhesion on furniture and home décor. Chalked Ultra Matte Sprays provide one coat coverage on most surfaces without special surface preparation or priming. It can be painted or distressed, giving the project a one of a kind look. It is suitable for use on wood, metal, ceramic, glass, canvas and more.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Chalked Spray Paint

  • Easy application.
  • Superior coverage.
  • Dries to a chalky smooth finish.
  • Easily distressed to create a vintage look.

How to Apply Rust-Oleum Ultra Matte Chalked Spray Paint?

Surface Preparation

Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with soap and water and let dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy or porous surfaces. Remove any wax by lightly wiping the surface with mineral spirits.


Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart. Do not use near open flame.

Properties of Rust-Oleum Ultra Matte Chalked Spray Paint

Brand Rust-Oleum
Manufacturer Rust-Oleum
Resin Type Acrylic Modified Alkyd
Pigment Type Varies with color
Solvents Acetone, Mineral Spirits, Naphtha
Weight 340 gr
MIR 0.80 Max
Fill Weight 12 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
(25-50µ) mils
Dry Times at 70-80°F
(21-27°C) and 50% RH
20 minutes to Touch
1 hour to Handle
Within 1 hour or after 48 hours to Re-Coat
Dry Heat Resistance 250°F (121°C)
Shelf Life 5 Years
Flash Point -156°F (-104°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here