Rust-Oleum Specialty Camouflage Sprays are designed to provide a non-reflective finish on hunting and sporting equipment. Various colors can be combined in a variety of patterns to blend with any terrain. Camouflage Sprays are suitable for use on vehicles, tree stands, decoys, blinds, boats and equipment. Some plastics made of polyethylene such as Little Tikes children’s product are manufactured in such a way that may hinder maximum paint adhesion. Test paint in an inconspicuous area first. Not for use on galvanized metal.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Camouflage Spray Paint

Fast drying.
Suitable for indoor and outdoor.

For best results: Use leaves and twigs as stencils.

Properties of Rust-Oleum Camouflage Spray Paint

Brand	Rust-Oleum
Resin Type	Acrylic Modified Alkyd
Pigments	Varies with color
Practical Coverage at Recommended DFT (assumes 15% material loss)	Approximately 6.0-7.0 sq.ft./can
Dry Heat Resistance	200°F (93°C)
Flash Point	-156°F (-104°C)
For more information	Check TDS

Application of Rust-Oleum Camouflage Spray Paint

Surface Preparation: ALL SURFACES: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Mold and mildew must be cleaned with a chlorinated cleaner or bleach solution. Rinse with fresh water and allow to thoroughly dry.

Application: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 12-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying.

Rust-Oleum Specialty Camouflage Spray Paint

Have a question?