603005 603005 Seal Krete

Rust-Oleum Seal Krete Wet-Look Penetrating Surface Sealer

Product Code: 603005

Availability:Out of stock

Rs. 42,560.00 Rs. 38,304.00 38,304.00

Rust-Oleum Seal Krete Wet-Look Penetrating Surface Sealers offers ultimate protection to bricks, pavers, exposed aggregate, unglazed tiles, stamped concrete, sandstone, and Chattahoochee etc. from ultra violet rays, gasoline, oil, and salts. This sealer delivers beautiful wet-look and maintenance-free finish to surface. Its advanced nanotechnology offers 4 time more durability as compare to other wet-look sealers.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Wet-Look Penetrating Surface Sealer:-

  • Suitable of numerous surface.
  • Nanotechnology formula.
  • Hybrid-acrylic water-cleanup.

For Best Results: Read and follow the directions mentioned on tin.

How to Use Rust-Oleum Seal Krete Wet-Look Penetrating Surface Sealer

Surface Preparation: All surfaces must be clean, dry and oil-free. For oil stains, use a degreaser or SEAL-KRETE Oil Stain Remover. Do not apply to painted or stained surfaces. Do not apply over solvent or oil-based stains. Make sure all cure and seal compounds have been removed. Repair all cracks and surface breaks. Cover windows, doors, etc., prior to application. Use caution when applying on windy days. Remove any overspray immediately with water. New concrete must cure for a minimum of 30 days.

Application: Read “LIMITATIONS” section before use. This sealer is ready to use; do not dilute. Do not apply if rain is expected within 24 hours. Temperatures should not fall below 50°F (10°C) within 24 hours of application. Apply to porous, bare, uncoated concrete and masonry surfaces only. Etch smooth-finished concrete (such as patios or porches) with a concrete etching solution like SEALKRETE Clean-N-Etch. Apply until saturated using a brush, roller (3/8” nap), or low-pressure garden sprayer. Apply first coat, backrolling any puddles, and let dry 4 hours. Apply a second coat to maximize protection. Backroll to remove any puddles. On vertical surfaces, apply from the bottom up and saturate well. To improve slip resistance on horizontal surfaces, add SEAL-KRETE Clear Grip.

Click here for TDS

Safety Information: MSDS