Rust-Oleum Seal Krete Clear-Seal Protective Concrete Sealer
Product Code: 606005
Availability:Out of stock
Have a question?
Rust-Oleum Seal Krete Clear-Seal Protective Concrete Sealer is made to be used for painted, stain or bare concrete surface for protecting against moisture penetration. Moisture can bring efflorescence to your concrete surface. In order to protect your surface, Seal Krete Clear-Seal can be used. You can use this sealer for pool decks, garage, porches, driveways, patios etc. because of its stain repelling property. However, the appearance of this chemical is milky but become clear once penetrated and dried in concrete.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Rust-Oleum Seal Krete Clear-Seal Protective Concrete Sealer
- Enhance the appearance of surface.
- Resist moisture, salt, chlorine, oil, and hot tire pick-up.
- Non-yellowing acrylic.
NOTE: Refer to application instructions mentioned in TDS for best results.
Properties of Rust-Oleum Seal Krete Clear-Seal Protective Concrete Sealer
Liquid Properties |
Water-based. Low Odor. |
Clean-up |
Soap and water |
Appearance |
Milky white (wet), dries clear |
Coverage |
1,500 square feet |
Dry time |
1 Hour to touch. 24 hours to light foot traffic. Allow 3 days before exposing surface. |
Application guide |
Check technical data sheet. |
Safety information |
Check safety data sheet. |