301826 301826 Truworth Homes

Rust-Oleum Roofing Plastic Roof Cement

Product Code: 301826

Availability:In stock

Rs. 470.00 470.00

Available Options

Rust-Oleum Plastic Roof Cement is highly flexible and designed to stop cracking on roof. Particularly it resists cracking where horizontal and vertical walls meet on roof. You can use this fibered and asphalt based cement for installing or repairing roof flashing at vents, stacks, parapet walls. Moreover, it is possible to use the cement for sealing cracks in exterior foundation and chimney walls. The product serve excellent durability even when you use with fiber glass or polyester fabric.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Rust-Oleum Plastic Cement:-

  • Long lasting services.
  • 3 years warranty.
  • Use on roofs, chimneys, skylights, flashing.

Rust-Oleum Roofing Plastic Roof Cement

Surface Preparation: All surfaces must be clean, dry, sound and free from dirt, grease, oil, mold, algae, loose granules, loose gravel, loose paint, rust, excess chalk and other foreign matter which could prevent proper adhesion.

Trowel Apply with a pointed roofer’s trowel (⅛-¼”) thick. When making roof repairs or striping over the top of flashing laps, perform a 3-course repair consisting of one application of Plastic Roof Cement followed by an embedded strip of Rust-Oleum Universal Patching Fabric or other mesh, followed by a final application of Plastic Roof Cement. When repairing a blister, open the area and let dry thoroughly. Do not apply over wet or damp surfaces. Cartridge – Place

Properties of Rust-Oleum Roofing Plastic Roof Cement

Brand Rust-Oleum
Resin Asphalt
Pigment Type Mineral
Solvents Mineral Spirits
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Cartridge - Approximately 20 linear feet.
0.9 Gallon - Approximately 12.5 square feet.
4.75 Gallons - Approximately 65 square feet.
Shelf Life 1 year
Flash Point 105°F (41.5°C)
Click here TDS
Safety information MSDS