Rust-Oleum Peel Coat Top Coat Effect - Metallic - Gold Flake
Rust-Oleum Peel Coat Top Coat Effect - Metallic - Silver Flake

Rust-Oleum Peel Coat Top Coat Effects - Metallic Spray

Regular price Rs. 980.00 Sale

Rust-Oleum Peel Coat Metallic Topcoat is designed for use over any Peel Coat color. The metallic flakes add depth, shine and style to your finish. The more coats applied, the more dynamic the effect. Peel Coat is a removable rubber coating that provides endless customization for automotive and other applications. Peel Coat is suitable for use on metal, plastic and more.

Features of Peel Coat Top Coat Metallic Effect

  • The metallic flake finish takes Peel Coat designs to another level.
  • Apply over any Peel Coat color to get your ideal, custom finish.
  • Peelable rubber coating allows you to change up your look whenever you want.
  • Apply Top Coats ONLY over Peel Coat Base Colors.

How to Apply Rust-Oleum Peel Coat Top Coat Effect - Metallic Spray

Painting Conditions: Use outdoors or in a well ventilated area. Use when temperature is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying. Do not apply to galvanized metal. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation Thoroughly wash Peel Coat base coat with soap and water prior to application. Rinse with fresh water and allow to dry.

Application: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Mask off the area to be coated. Make sure the Peel Coat color is completely dry before top coating. Hold can 8-12"" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Apply as many coats as desired. The last coat should be applied as a wet coat to ensure the coating lays smoothly on the surface. Remove any tape while the last coat is still wet. Allow coating to dry 5 minutes between coats. Allow the coating to cure for 24 hours before washing. The topcoat alone cannot be removed. If desired, the topcoat and base coat color are removed together. Do not use near open flame.

Properties of Rust-Oleum Automotive Peel Coat Spray Paint

Brand Rust-Oleum
Resin Type Synthetic Rubber
Pigment Type Varied Metallic Flakes
Solvents Blend of Aliphatic and Aromatic Solvents
Weight Gold Flake: 315 Grams. Silver Flake: 316 Grams
Recommended Dry Film
Thickness (DFT) Per Coat
0.5-1.0 mils (12.5-25µ)
Practical Coverage 
at Recommended DFT
7.5 sq.ft./can
Dry Times at 70-80°F 
(21-27°C) and 50% Relative Humidity
20 min to touch. 1 hour to re-coat
Dry Heat Resistance 200°F (93°C)
Shelf Life 2 years
Flash Point -140°F (-96°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here