Rust-Oleum Okon Penetrating Acrylic Barriers Plugger
Rust-Oleum Okon Penetrating Acrylic Barriers Plugger - 18.9 Ltr.
Rust-Oleum Okon Penetrating Acrylic Barriers Plugger - 3.4 Ltr.
Rust-Oleum Okon Penetrating Acrylic Barriers Plugger - 1 Ltr.

Rust-Oleum Okon Penetrating Acrylic Barriers Plugger

Regular price Rs. 1,070.00 Sale

OKON PLUGGER is water base, low VOC, acrylic microemulsion specifically designed to protect both new and existing porous concrete surfaces. The special blend of acrylic resin and water repellent additives provides multiple benefits especially important when protecting very porous CMU.


  • The acrylic resin reduces the pore size of the substrate thereby reducing the capillary action that draws water into the substrate
  • The proprietary water repellent lowers the surface tensions and further counteracts the capillary pull.

Features of Okon Penetrating Acrylic Barriers Plugger


  • Water based Acrylic Micro-Emulsions
  • Non-yellowing
  • Re-coatable
  • Resist high alkalinity
  • Resist blushing

How to Apply Okon Penetrating Acrylic Barriers Plugger


Surface Preparation


Clean surface using oil-free, compressed air to remove loose and foreign matter that could interfere with application or performance of coating. Pressure wash surface to remove dust, sand or other foreign matter. Allow pressure washed surfaces to dry three days prior to coating. Remove exterior mildew with JOMAX or equivalent. Remove efflorescence with sulfamic or dilute muriatic acid. Spot cleaning with acid may cause uneven porosity and blotchy appearance. Rinse the surface thoroughly after chemical cleaning. Un-rinsed acid salts may cause whitish-blotches to appear. Surface can be slightly damp at time of application.


Application


PLUGGER is best applied by airless spray. Use a small to medium size airless pump (⅓-⅔ gpm) at 500 psi and a 0.031”- 0.035” tip. Protect adjacent and underlying surfaces from over spray and rundown. The surface temperature at time of application and for four hours after application is very important. Application to cold (<50°F) or to hot surfaces (>100°F) will reduce the durability of the material. Surfaces temperatures >100° F can be cooled by misting with water immediately prior to application. PLUGGER can be applied to damp but not wet surfaces. The surface is wet if moisture transfers to your hand when you touch it or if it glistens in appearance.

Properties of Okon Penetrating Acrylic Barriers Plugger


Manufacturer Rust-Oleum
Resin Type Acrylic
Color Milky White in Can / Colorless on Surface
Solvents Water
Volatile Organic Compounds <75 g/l (0.63 lbs./gal.)
Application Parameters 50°F to 100°F (7°C to 38°C)
<85% Relative Humidity
Dry Times at 70-80°
(21-27°C) and 50% RH
3 hours to Touch
3 hours to Re-Coat
Protect From Rain 24 hours
Protect From Dew 12 hours
Shelf Life 3 years
Flash Point NA
Safety Information For additional information, see MSDS
Technical Data Sheet Click here