Mirror Effect Sprayis an innovative coating that transforms glass and acrylic glass into a unique mirror finish. It is ideal for glass vases, candle holders, framed glass, jars and tabletops. Apply to the reverse or opposite side of glass. Interior use only.

NOTE: Ensure that the glass is clean by using a glass cleaner or soap and water with a micro fiber cloth. Apply using very thin coats, allowing the paint to dry for 1 minute between coats. Apply up to 5 coats to achieve the desired mirror effect. For added protection or reflectivity, apply a thin coat of Rust-Oleum Ultra Cover 2X Matte Clear. For a darker appearance, apply a thin coat of Rust-Oleum Ultra Cover Flat Black to the painted side of Silver Mirror Effect.

Featured Video of Specialty Mirror Effect Spray Paint

How to Use Mirror Effect Spray Paint?

Appropriate Conditions to Spray

Use outdoors or in a well ventilated area such as an open garage. Apply when temperature is between 50-90ÂºF (10-32ÂºC) and humidity is below 85% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200Â°F (93Â°C) or galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation

Remove water spots and other imperfections on substrate to achieve optimal results. Clean glass thoroughly with glass cleaner or soap and water, using a lint free cloth. Allow glass to dry completely before painting. Coating will not hide imperfections on substrate.

Application / Spraying

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Make sure to apply paint to the reverse side of glass that will be displayed. Hold can upright 10-12â€ from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Apply using very thin coats, allowing the paint to dry for 1 minute between coats. Apply up to 5 coats to achieve the desired mirror effect. Paint will rapidly change in appearance and mirror effect will appear while coating dries. The painted side will appear dull with the reverse side showing the mirror finish. Do not use near open flame.

Properties of Specialty Clear Matte Finish Spray

Brand	SPECIALTY
Manufacturer	Rust-Oleum
Resin Type	Cellulose Ester
Pigment Type	NA
Solvents	Acetone, N-Butyl Acetate
Weight	170 Grams
Practical Coverage at Recommended DFT (assumes 15% material loss)	3-5 sq.ft./can
Dry Times at 70-80Â°F (21-27Â°C) and 50% Relative Humidity	5-10 minutes to touch and fully dry
Shelf Life	5 years
Flash Point	-156Â°F (-104Â°C)
Safety Information	For additional information, see MSDS
Technical Data Sheet	Click here

Rust-Oleum Specialty Mirror Effect Spray Paint

Available Options

Have a question?