Rust-Oleum Industrial Specialty Steel-Tech Spray Paint
Get ultimate metal protection with Rust-Oleum’s High Performance Steel-Tech Spray Paint. This innovative coating is infused with stainless-steel flakes to provide ultimate protection in harsh environments.
Features of the Product
- Matches Steel-Tech polyurethane coating for easy touch up.
- High paint solids for excellent coverage in one coat.
- Dries fast in only 20 minutes to touch.
- Provides excellent gloss retention.
- Uses real 316L stainless steel flakes.
- Tough, professional finish resists chipping, cracking and peeling.
- Can be used on surfaces that reach up to 200 degrees F.
- Meets USDA requirements.
How to Apply Industrial Specialty Steel-Tech Spray Paint
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with Pure Strength® Cleaner/Degreaser item #3599402, commercial detergent, or other suitable cleaner. Mold and mildew must be cleaned with a chlorinated cleaner or bleach solution. Rinse with fresh water and allow to dry.
Use when temperature is above 50°F (10°C) and humidity is below 85% to ensure proper drying. Surface temperature must be between 50-100°F (10-38°C). Use primer on bare or rusted surfaces. Do not use any primer with V2116838 High Temperature Aluminum, V2176838 High Temperature Black, V2117838 Bright Galvanizing Compound or V2185838 Cold Galvanizing Compound.
Properties of Industrial Specialty Steel-Tech Spray Paint
|Resin Type||Oil modified Polyurethane|
|Pigment Type||Stainless Steel|
|Solvents||Acetone, Toluene, Xylene|
|Recommended Dry Film
Thickness (DFT) Per Coat
|Practical Coverage at
|Dry Times at 70-80°F(21-27°C)
and 50%Relative Humidity
|10-20 minutes to Take-free
1-2 hours to Handle
Within 1 hour or after 24 hours to Recoat
|Dry Heat Resistance||200°F (93°C)|
|Shelf Life||5 years|
|Flash Point||-4ºF (-20ºC)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|