Rust-Oleum BuildKote Polyurea Floor Coating Primer - Part A
BuildKote is a two component, high solids Polyurea primer suitable for use with a variety of topcoats. It can also be used as a basecoat for color aggregate or color flake finishes.
Features of BuildKote Polyurea Floor Coating Primer - Part A
- Can be applied by spray or roller at temperatures between -20-100 F and in high humidity
- Fast dry coating can be top coated in 2-4 hours
- Provides excellent adhesion to concrete, fiberglass, wood, epoxy, urethanes and polyurethanes
- Can be applied clear or tinted with Polyurea Universal Tints
- Can also be applied to vertical surfaces as a primer or stand-alone coating
How to Apply BuildKote Polyurea Floor Coating Primer - Part A
The concrete surface must be free of all dirt, grease, oil, fats, and other contamination. Remove surface contamination by cleaning with Pure Strength 3599 Industrial Cleaner/Degreaser, detergent, or other suitable cleaner. Rinse thoroughly with clean, fresh water and allowed to dry.
Apply only when air, material and floor temperatures are between -20 - 120Â°F (-29 - 32Â°C). Do not apply in direct sunlight or when temperature is rising. Immediately after mixing, pour the material onto the floor in a long, 8 to 12 inch wide stripe.
Properties of BuildKote Polyurea Floor Coating Primer - Part A
|Solids By Volume||98%|
|Volatile Organic Compounds||<10 g="" l="" td="">|
|Mixing Ratio||1:2 (Part A to Part B)|
|Induction Time||None required|
|Pot Life||20-25 minutes|
|Practical Coverage at Recommended
|80-200 sq.ft./3.78 Ltr.
Coverage rate can vary depending on the texture
and porosity of the concrete
|Dry Times at 70-80Â°
(21-27Â°C) and 50% RH
|2-12 hours to Re-Coat
2-4 hours to Light Traffic
24 hours to full Traffic
|Shelf Life||12 months|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|