Achieve a smooth, professional finish—with zero VOCs—using Rust-Oleum Sierra Performance™ Beyond™ Acrylic Enamel. This water-based formula contains no VOCs, HAPs1 or solvent odor and is ideal for schools, cafeterias and settings where paint fumes are an issue.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of the Product
- Superior resistance to chipping, cracking and peeling; excellent color retention.
- Fast, convenient, single-component system—dries in 30 minutes.
- Impervious to moisture; easily cleaned and sanitized.
- For interior/exterior use on primed or painted metal, concrete, masonry, wood, drywall, tile.
- Meets USDA requirements for incidental food contact; LEED approved.
How ot Apply Beyond Acrylic Enamel Paint - White Pastel Base
All Surfaces: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with Krud Kutter Cleaner Degreaser, commercial detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry.
Steel: Scrape and wire brush or power tool clean to remove loose rust, scale, and deteriorated coatings in accordance to SSPC-SP-2 Hand Tool Cleaning or SSPCSP-3 Power Tool Cleaning. Steel substrates must be primed with MetalMax Primer. Two coats of primer must be used if the substrate was prepared by abrasive blast cleaning.
Previously Coated: Previously coated surfaces must be sound and in good condition. Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with Krud Kutter® Cleaner Degreaser, commercial detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile. Beyond is compatible with most coatings, but a test patch is suggested.
Apply only when air and surface temperatures are between 50°-100°F. (10°-38°C) and surface temperature is at least 5°F above dew point.
Properties of Beyond Acrylic Enamel Paint - White Pastel Base - Satin
|Resin Type||Acrylic Urethane|
|Pigment Type||Varies with color|
|Recommended Dry Film
Thickness (DFT) Per Coat
|1-3 mils (25-75µ)|
|Practical Coverage at Recommended DFT
(assumes 15% material loss)
|135-490 sq.ft./gal. (3.3-12.1 m2/l)|
|Dry Times at 70-80°F(21-27°C)
and 50%Relative Humidity
|30 minutes to Take-free
2-4 hours to Recoat
|Dry Heat Resistance||200°F (93°C)|
|Shelf Life||3 years|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|