Rust-Oleum Automotive Fabric and Vinyl Sponge Applicator is a one-step solution to restore the faded color of car interiors. It is designed to use for seats, door panels, dashboard, door mats etc. As per the TDS of this product, it covers 13-14 square feet of area with one bottle. This is very convenient to use, just push the bottle gently and paint will come out.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Fabric & Vinyl Sponge Application

Ideal for vinyl or fabric car seats, dashboards, upholstery, door panels, shifter boots etc.

Contains actual vinyl for maximum flexibility.

Fast drying.

Excellent coverage.

Easy-to-use.

NOTE: For best result, read and follow the instructions carefully that are printed on tin.

How to Apply Rust-Oleum Fabric and Vinyl Sponge Applicator

Surface Preparation

Clean surface with mineral spirits, using a clean cloth to dry the surface. When dry, follow with soap and water, rinse thoroughly and dry with a clean cloth. Mask surrounding area to protect from drips and spills.

Application

With cap on, shake bottle for one minute. Recap and shake as needed during the painting process. Depress the sponge applicator tip in an inconspicuous area or onto a piece of scrap material to start the paint flow. Apply paint using light pressure on the bottle. For best appearance, apply one thin coat. Let the surface dry thoroughly and then apply two additional coats.

Properties of Rust-Oleum Fabric & Vinyl Sponge Applicator

Brand	Rust-Oleum Automative
Manufacturer	Rust-Oleum
Resin Type	Polyurethane
Pigment Type	Black - Organic Sand - Organic/Inorganic
Solvents	N-methyl Pyrrolidone, Glycol Ether EP
Weight	118 gr
Volatile organic Compounds	<250 g="" l="" 2="" 08="" lbs="" gal="" td="">
Recommended Dry Film Thickness (DFT) Per Coat	0.5 mils (12.5µ)
Dry Times at 70-80°F (21-27°C) and 50% RH	15 minutes to Touch 30 minutes to Handle 1 hour to Re-Coat 24 hours to Full Care
Dry Heat Resistance	250°F (121°C)
Shelf Life	6 months
Flash Point	>200°F (93°C)
Safety Information	For additional information, see MSDS
Technical Data Sheet	Click here

Rust-Oleum Automotive Fabric and Vinyl Sponge Applicator

Have a question?