Rust-Oleum Non-Fibered Asphalt Damp Proof Paint empowers you to make concrete surface waterproof. This innovative paint is particularly made of foundations and roofs. This paint will give you satisfying results when used for waterproofing of exterior below grade foundations and walls. The merits which keeps paint at the top as compare to others are this is resistant to corrosion, can be used under reflective coatings as base coat, won’t spoilage in extreme weather, and more.
Attribute of Rust-Oleum Non-Fibered Damp Proof Paint
Water-based formula for roof and foundations
Long lasting – weather proof.
A gallon covers approximately 100 square feet of area (gallon contains 3.78 liters).
Fast drying, thus application task can get completed in short instance.
For best results: It is good to apply when temperature remains between 10-380C. Mixing is recommended until paint is smooth and consistent.
How to Use Rust-Oleum Non-Fibered Asphalt Damp Proof Paint
Surface Preparation: Your surface must be clean and in good condition. If there is dust, you need to remove the same with appropriate method. It is recommended to examine the area carefully especially those areas which are nearby chimneys, vent pipes, roof edges, air conditioning unites, and parapet walls.
Simple Application: As it is mentioned above, use the damp proof paint when needle of temperature lies between 10-380 C. For proper mixing, use mechanical mixer. As stated above, mix the solution until it becomes smooth and consistent.
Brush Application: Remember, if you are thinking to use Non-Fibered Damp Proof Paint via spray then equipment must have pressure of 1000 PSI and a delivery rate of 3 to 6 gallons per minute.
Specification of Rust-Oleum Non-Fibered Asphalt Damp Proof Paint
Asphalt, Clay Emulsion
Practical Coverage at Recommended DFT (assumes 15% material loss)