Rust-Oleum Striping Spray Paint is manufactured for marking purposes. This aerosol spray is ideal to mark roads, parking, foot path and more. This is ideal to use for concrete, blacktop, gravel, soil and grass. It is recommended to use it striping wand or striping machine for large jobs.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Striping Spray Paint
How to Use Rust-Oleum Striping Spray Paint
Remove all dirt and contaminants by sweeping the concrete or blacktop before application of the coating. Grease, oil and chemical contaminants are best removed by washing the surface with a commercial detergent or other suitable cleaner. Rinse thoroughly with fresh water and allow to fully dry.
Apply when temperature is above 32°F (0°C) and humidity is below 85% to ensure proper drying. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. The Inverted Striping sprays are designed for use with the Rust-Oleum Striping Machine item #2395000. Follow machine directions for proper use. The width of the stripe can be varied from 2 to 4 inches wide by adjusting the position of the can holder on the Striping Machine. For best results be sure the Striping Machine is in motion before squeezing the trigger and release the trigger before stopping.
Properties of Professional Striping Spray Paint
|Resin Type||Vinyl Toluene Modified Alkyd|
|Pigment Type||Varies with color|
|Solvents||Acetone, Mineral Spirits, Toluene, VM&P Naphtha, Xylene|
|Practical Coverage at Recommended DFT
(assumes 15% material loss)
|2 inch stripe: 400 feet (coverage is dependent on surface porosity)|
|Shelf Life||5 years|
|Practical Coverage||Will depend on the coating, method of application and surface type|
|Flash Point||-156°F (-104°C)|
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|