Painter's Touch Acrylic Spray Paint for Plastic, Wood, And Metal
Rustoleum Painter’s Touch Acrylic Spray Paint is the first choice of DIYers but it solves their multi purposes! These spray paints are ideal for wood, metal, plastic, glass, and for many other surfaces. Moreover, Painter’s Touch Spray Paints play the role of top coat paint and primer as well at a time. So, you can paint your chairs, tables, cooler, almirah etc. Apart from the above mentioned features, the coverage of these sprays are very good. You can paint approximately 8 to 10 square feet of area with one spray can. Of course, the color options are very important. Buyers always need attention grabbing colors. Therefore, Painter’s Touch Sprays are available in numerous nature’s inspired colors with gloss, semi-gloss and satin finishes.
Features of Painter’s Touch Acrylic Spray Paint
Offers long lasting protection.
Interior or exterior surface can be painted with Painter’s Touch.
Verities of colors are available.
Convenient for touch ups.
These spray are fast drying.
Tips for Best Results: Apply several light coats instead of single heavy coat.
Best Practices to Use Rustoleum Painter’s Touch Acrylic Spray Paint
Follow the Below Mentioned Instructions for Best Results
Appropriate Environmental Conditions to Spray: Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Surface Preparation For Best Result: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent or other suitable cleaning method. Rinse thoroughly with fresh water and allow to thoroughly dry. All surfaces must be dry at time of application. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces to create a surface profile.
Spraying/Application: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Properties of Painter's Touch Acrylic Spray Paint
Acrylic Modified Alkyd
Varies with Color
Acetone, Toluene, Xylene
Recommended Dry Film Thickness (DFT) Per Coat
1.0-2.0 mils (25-50µ)
Practical Coverage at Recommended DFT
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity
20 minutes to touch and re-coat within 1 hour or after 48 hours