Krud Kutter Ultra Power Adhesive Remover Spray
Product Code: UP326
Availability:Out of stock
Have a question?
Krud Kutter Adhesive Remover is manufactured to remove adhesive, cable jelly, diesel soot, duct tape, fresh oil-based paint, mastic, silicone sealant, oil, grease, lubricants, foam, caulk, carbon black, liquid nails, roofing tar and more. This cleaning chemical is safe to use for most of the surfaces excluding leather, silk, rubber, elastic, suede, and varnish.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Krud Kutter Adhesive Remover
- Non-hazardous, safer alternative for removing acetone, paint thinners & other traditional solvents.
- Environmental friendly.
- Environmental friendly.
For best results, let it penetrate for 5 minutes.
Featured Video of Krud Kutter Ultra Power Adhesive Remover
How to Use Krud Kutter Ultra Power Adhesive Remover
Directions for Wet Surface: Using a disposable cotton towel, remove as much wet solution as possible. Apply remover and allow to penetrate for 2-5 minutes. Peel, scrape or wipe. Rinse.
Directions for Dry Surface: Remove as much dry solution as possible by scraping clean. Apply remover and let set up for 30-60 minutes. Peel, scrape or wipe. Rinse
Properties of Krud Kutter Adhesive Remover
Brand | Krud Kutter |
---|---|
Manufacturer | Rust-Oleum |
Composition | D-Limonene Terpene, Dipropylene Glycol Mono Methyl Ether |
pH | 3.5 |
Weight | 946 ml |
Shelf Life | NA |
Flash Point | 172°F (78°C) |
Caution! |
DANGER: Contains petroleum distillates. Eye and skin irritant. Use in well ventilated area. Do not use near heat, sparks or flames. FIRST AID: If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention immediately. In case of contact with eyes or skin, flush with water or 15 minutes. If irritation persists, seek medical attention. Safety Data Sheets available. KEEP OT OF REACH OF CHILDREN. General Purpose Adhesive Remover 20% VOC Compliant. |
Safety Information | For additional information, see SDS |
Technical Data Sheet | Click here |