Rust-Oleum Brake Caliper Cleaner Spray is perfect to clean drums, brake fluid, grease, oil and more. It may require multiple application for areas where heavy deposit are present. Use it before applying Rust-Oleum Caliper Paint.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Caliper Cleaner Spray
- Removes contaminants from brake calipers and drums.
- Recommended for use before painting calipers.
- Rust preventive formula.
- Effectively remove stains
- Easy to use.
NOTE: Shake can properly before using.
How to Apply Rust-Oleum Brake Caliper Cleaner Spray?
Ideal Conditions to Spray
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90°F (10- 32°C). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Brake dust may contain asbestos. Remove all loose brake dust with an enclosed cylinder/HEPA vacuum. To reduce exposure to air-borne asbestos fibers, do not use Caliper Cleaner to remove dry or loose dirt.
Shake can vigorously for one minute. Shake often during use. Hold can 10-16” from the surface and spray in a steady back-and-forth motion and allow to run off or wipe dry with a clean cloth. Repeat as necessary for areas with heavy deposits. Do not apply to brake linings, painted surfaces, plastic, or parts made of rubber. Do not use near open flame.
Properties of Rust-Oleum Caliper Cleaner Spray
|Solvent Type||Blend of acetone and aromatic hydrocarbons|
|Practical Coverage at Recommended DFT||4-8 calipers/can|
|Shelf Life||5 Years|
|Flash Point||-156°F (-104°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|