Rust-Oleum American Accents Designer Metallic Spray Paint converts general surfaces into good looking metallic finish. This paint is best for those who want to give aged look to the surface or want to decorate home items or want to convert picture frames/lamp vases/candle holders/furniture/other into metallic finish. This is available in unique colors including classic bronze, aged bronze, aged brass, aged copper, stain nickel and oil rubbed bronze. This can be sprayed over wood, metal and many other surfaces.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of American Accents Metallic Spray Paint
- Convenient for interior and exterior surfaces.
- Resists chipping and peeling.
- Superior coverage.
- Long lasting finish.
NOTE: In case of having any query, kindly check the question answer section or contact us.
How to Use American Accents Metallic Spray Paint?
Appropriate Conditions to Spray
It is good to consider weather conditions before spraying because this will help you to achieve best results as well as will keep you safe. Proper ventilation is must while spraying so always use in a well-ventilated area like garage or porch. It is not suggest to apply American Accents Metallic Spray Paint when the temperature of surface is more than 93°C. It is not recommended to use when weather conditions are windy or dusty. As this a flammable product, don’t use it near open flame. Also, keep this away from kids.
Surface Preparation Assures Good Results
Have you check that your surface is ready for application of paint? You need to prepare the surface by removing existing dirt and dirt. Remember, surface must be free of dust as well as dirt before application. If surface is already painted with glossy paint then you can use Krud Kutter Gloss-Off to eliminate the glossiness so that can stick to the surface properly.
Apply American Accents Metallic Spray Paint
Before spraying, share the aerosol cane properly for a while and shake often during use. The distance between cane and surface should be same during application. Keep the spray cane in motion while spraying. Apply multiple light coats instead of a single thick coat.
Properties of American Accents Metallic Spray Paint
|Resin Type||Solvent Acrylic|
|Pigment Type||Varies with color|
|Solvents||Acetone, Toluene, Xylene|
|Recommended Dry Film
Thickness (DFT) Per Coat
|1.0-2.0 mils (25-50µ)|
at Recommended DFT>
(assumes 15% material loss)
|Dry Times at 70-80°F (21-27°C)
and 50% Relative Humidity
|15 minutes to touch. Re-coat after 4 hours|
|Shelf Life||5 years|
|Flash Point||-156°F (-104°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|