Rust-Oleum Automotive Car Touch Paint – Acrylic Enamel Spray Paint
Are you looking for car touch paints? Truworth brings special product named “Rust-Oleum Automotive Acrylic Enamel Spray Paint” which is perfect for car and bike touch ups. Vehicle touch up paints must have inbuilt features such as appropriate color retention, ideal for exterior surfaces, hide minor imperfections, deliver glossy finish, and more. Our automotive acrylic enamel sprays have all these inbuilt features. Although, painting vehicle is one of the toughest tasks but we offer touch up paints in aerosol spray cans so that you can paint your vehicle with enthusiasm. Generally, auto paints are ideal for metal only but you can use these Rust-Oleum Sprays for wood as well.
Features of the Product
Available in numerous color including black, white, red, and more.
One can covers 10-12 square feet of area.
Easy to use.
Perfect for DIYers.
NOTE: Rust-Oleum Primers enhance the durable of these paints if use as base coat, especially on bare wood and metal.
How to Apply Rust-Oleum Automotive Acrylic Enamel Spray Paint?
Ideal Spraying Conditions
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90°F (10- 32°C) and humidity is below 85% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200°F (93°C) or galvanized metal. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Use of a Rust-Oleum primer provides added corrosion protection, enhances adhesion and hiding, and is especially recommended for metal and wood surfaces. Recommended primers include 7769830 Rusty Metal Primer, 7780830 Clean Metal Primer, 2067830 Flat Red Auto Primer, 2081830 Flat Light Gray Auto Primer, and 2089830 Flat Dark Gray Auto Primer.
Wash the surface with a commercial detergent, or other suitable cleaning method to remove dirt. Rinse with fresh water and dry with a clean cloth. Remove all oil, grease, wax and petroleum based materials with mineral spirits. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying. Apply 2 or more light coats a few minutes apart. Do not use near open flame.
Properties of Rust-Oleum Acrylic Enamel Spray Paint
Recommended Dry Film Thickness (DFT) per Coat
1.5-2.5 mils (37.5-62.5µ)
Practical Coverage at Recommended DFT (assumes 15% material loss)
Dry Times at 70-80F (21-27°C) and 50% Relative Humidity
20 minutes to touch and re-coating within 1 hour or after 48 hours