313835 313835 Varathane

Rust-Oleum Varathane Wood Accelerator

Product Code: 313835

Availability:Out of stock

Rs. 1,490.00 Rs. 1,341.00 1,341.00

Rust-Oleum Varathane Wood Accelerator is made for giving vintage effect on bare wood surface within one step. It makes wood aged as same as wood becomes aged naturally. You can use this finish for all types of wood. Finial color depends on type of wood. The water-based formula is easy-to-use as you can apply it by using paint brush as show in below video. Varathane Wood Accelerator is made for indoor use only.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Wood Accelerator

  • Make wood surface vintage within minutes.
  • One step application.
  • Water-based formula.
  • Ideal for bare or untreated wood surface.

NOTE: Read and follow the directions carefully for best results.

Technical Details of Varathane Wood Accelerator

Main Ingredient

Ferrous Sulfate Heptahydrate

Pigment Type




Practical Coverage at Recommended DFT (assumes 15% material loss)

275 sq.ft./quart depending on wood type and porosity

Shelf Life

3 years

Flash Point

>200°F (93°C)

Safety Information

For additional information, see MSDS

Technical Data Sheet

Click here


Application of Varathane Wood Accelerator

Surface Preparation: Remove any existing finishes with sandpaper or liquid stripper. Weathered Wood Accelerator works best on bare or untreated wood. Prepare bare wood by sanding in the direction of the grain with #100 grit sandpaper. Remove any dust with a clean, dry rag. 

Application: Stir or shake material thoroughly before and occasionally during use. For best results, use at temperatures between 60ºF (16ºC) and 90ºF (32ºC). Apply with a synthetic bristle brush or foam brush. Allow Weathered Wood Accelerator to sit on the wood for 30 minutes to 1 hour for the final effect. Wiping away is not required. For a lighter effect, apply product and wipe away immediately or lightly sand the finish with fine grit sandpaper once it is dry. To darken, a second coat can be applied after 1 hour. To remove Weathered Wood Accelerator, apply bleach to the surface and wipe off.

For more information, check Technical Data Sheet.