224740 224740 Varathane

Rust-Oleum Varathane Universal Wood Sanding Sealer

Product Code: 224740

Availability:Out of stock

Rs. 6,350.00 Rs. 5,715.00 5,715.00

Varathane Universal Wood Sanding Sealer offers sandable wooden surface by sealing pores. This sealer is formulated to work under any clear finish, including oil or water-based polyurethane and lacquers. Qualities which makes it different from other brand are, it dries clear and can be removed with soap and water. This product is suitable to use for all interior wood projects.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Universal Wood Sanding Sealer

  • Low-odor formula seals wood and sands easily.
  • Easy clean-up with soap-and-water.
  • Enhances finish by making it ultra-smooth.
  • Suitable to use with oil and water-based polyurethane.

NOTE:For best result, read the instructions carefully printed on tin before use.

How to Apply Varathane Universal Wood Sanding Sealer?

Surface Preparation

To ensure proper adhesion, surfaces must be clean, dry, and free of old finishes, dirt, oils or other foreign matter. Old finishes in poor condition must be removed. Sand the area smooth, progressing with 120 to 220 grit sandpaper and vacuum surface to remove dust. Do not use steel wool as rust may develop after the finish has been applied. Wipe surface with clean, lint-free cloth

Unfinished Surfaces - Sand using 180-220 grit sandpaper and remove all sanding dust using a vacuum, tack cloth, or rag dampened with mineral spirits. If a filler or putty is used, make sure it does not contain wax and allow enough time for it to dry thoroughly.

Stained Or Painted Wood - Apply stain prior to applying Varathane Sanding Sealer. Follow the manufacturer’s directions for application of the stain. Allow the stain to thoroughly dry before applying Varathane Sanding Sealer. Refer to the stain manufacturer’s label for dry times.


Use in an area with adequate ventilation such as an open garage. Apply only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Use full strength. Do not thin. Stir thoroughly before and during use. To prevent bubbles in the finish, DO NOT SHAKE, do not over-brush, or apply with a roller.

Apply using a good quality synthetic bristle brush, foam brush or applicator. Apply in the direction of wood grain in smooth, uniform coat. Lower temperatures and/or higher humidity may cause slower dry times. Lightly sand the surface with 220-280 grit sandpaper. A powder should develop when sanded. Do not over-sand to avoid removal of the sanding sealer or previous stain. Remove sanding dust with a vacuum or a clean lint-free rag.

Once the sanding sealer is dry, apply the wood finish of choice. For best results, use any Varathane Polyurethane. Follow the manufacturer’s direction. Allow the finish to dry 24 hours before light use. Wait 3 days before subjecting surface to normal use.

Properties of Varathane Universal Wood Sanding Sealer

Brand Varathane
Manufacturer Rust-Oleum
Resin Type Acrylic
Pigment Type Inorganic
Solvents Water
Weight 3.78 Ltr.
Volatile Organic Compounds 125 g/l
(1.04 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coa
1.0-1.5 mils
Dry Times at 70-80°F
(21-27°C) and 50% RH
1 hour to Touch
1-2 hours to Re-Coat
24 hours to Light use
3 days to Full Cure
Shelf Life 3 years
Flash Point 200°F (93°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here