Rust-Oleum Varathane No Sanding Refinishing Prep
Varathane No Sanding Refinishing Prep offers an easy solution for preparing wood surfaces for refinishing without the need of messy sanding or special equipment. It prepares the wood surface by abrading and cleaning the existing worn, scratched or dull finish without harming or discoloring the stain color underneath. Use of Varathane No Sanding Refinishing Prep also allows you to apply Varathane Refresher to laminate surfaces.
Features of the product
- Sanding is not necessary.
- Fast solution to restore the wood.
- Cleans tough dirt.
- Convenient to use for laminated floors, hardwood and finished wood.
NOTE: Before using, read and following the instruction carefully printed on tin.
How to Apply Varathane No Sanding Refinishing Prep
Remove any loose dirt or dust using a damp rag. While Varathane No Sanding Refinishing Prep is compatible with all types of previously finished surfaces, it is not compatible with wax. To test the surface for wax, dampen a rag with mineral spirits and wipe it on the surface. If the rag pulls up a waxy substance, then the surface contains wax. To remove and dissolve the wax from the surface, dampen a rag with mineral spirits and wipe the surface until clean.
Working in small sections, apply No Sanding Refinishing Prep directly to the surface with a mild abrasive scrub pad attached to a pole. Using a back and forth motion following the direction of the grain in a “Z” pattern. On vertical surface apply directly to the scrub pad and follow the procedure above. Use of glove is highly recommended.
Wipe the surface clean with a damp rag or sponge mop before the No Sanding Refinishing Prep has a chance to dry. Repeat the process until all sections of the surface have been treated and allow the entire floor to dry for 30 minutes before applying a new top coat.
Laminate Floors - No Sanding Refinishing Prep is required if you are planning to apply Varathane Wood Refresher to laminate floors.
Properties of Varathane No Sanding Refinishing Prep
|Solvents||Glycol Ether and Water|
|Volatile Organic Compounds||485 g/l (4.05 lbs./gal.)|
|Theoretical Coverage at
1 mil DFT (25µ)
|Dry Times at 70-80°F
(21-27°C) and 50% RH
| 30 minutes to Touch
30 minutes to Topcoat
|Shelf Life||3 years|
|Flash Point||>200°F (93°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|