Most homeowners have experienced roofing problems at some point in their lives. From small leaks to major cracking, roofs suffer from a number of common ailments that demand immediate attention. Everything from foot traffic to local wildlife can leave scrapes, puncture marks or even big holes in a roof. Over time roofs can develop cracks, blisters, and ridges. Rust-Oleum Rubberized Wet Patch is a premium quality roof cement blended which can be applied directly to cold, hot, dry or underwater surfaces. This is heavily fibered for increased durability and longevity as it can be used to repair and restore flashings and roofing defects such as blisters, cracks and punctures.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Rust-Oleum Rubberized Wet Patch:-
Long term warranty.
Resistant to sag.
Ideal for vertical repairs.
Highly flexible.
NOTE: Read and follow the directions mentioned on tin.
How to Use Rust-Oleum Rubberized Wet Patch
Surface Preparation:All surfaces must be clean, sound and free from dirt, grease, oil, mold, algae, loose granules, loose gravel, loose paint, rust, excess chalk and other foreign matter which could prevent proper adhesion.
Application: Apply with a trowel directly over a cleaned substrate at a rate of 12 square feet per gallon or approximately ⅛” thick. When making roof repairs or striping over the top of flashing laps, perform a 3-course repair consisting of one application of Rubberized Wet Patch followed by an embedded strip of Rust-Oleum Universal Patching Fabric or other mesh, followed by a final application of Rubberized Wet Patch.
Properties of Rust-Oleum Rubberized Wet Patch
Brand
Rust-Oleum
Resin
Asphalt
Pigment Type
Mineral
Solvents
Mineral Spirits
Practical Coverage at Recommended DFT (assumes 15% material loss)
Approximately 12 square feet depending on ambient temperature and surface conditions
