Rust-Oleum Universal Aged Metallic Spray Paint
Product Code: 285073
Availability:Out of stock
Have a question?
Try a industrial, modern, metallic look on your next project. Rust-Oleum Universal Aged Metallic Spray Paint is a paint and primer in one that provides superior coverage and durability on any surface and at any angle—with the unmatched comfort of our patented trigger technology.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Aged Metallic Spray
- For use on interior / exterior environments.
- One Universal coating for diverse substrates.
- Ultimate flexibility for extreme applications.
- Maximum adhesion for demanding substrates.
- Fast, efficient coverage.
- Fade and chip resistant.
- Rust Preventive
Featured Video for Universal Aged Metallic Spray Paint
How to Use Aged Metallic Spray
Appropriate Conditions to Use
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90ºF (10- 32ºC) and humidity is below 65% to ensure proper drying. Do not use on objects that may exceed 200ºF (93ºC) surface temperature. Do not apply to galvanized steel. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Surface Preparation
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
Application / Spraying
Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Prior to use, slide off the red safety clip from the trigger. Hold can upright 8-12” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more moderate coats at moderate speed to avoid drips and runs. Do not use near open flame.
Properties of Universal Aged Metallic Spray Paint
Properties | Weathered Steel | Metallic Rust |
---|---|---|
Brand | Universal | |
Manufacturer | Rust-Oleum | |
Weight | 312 Grams | |
Resin Type | Alkyd Modified Hydrocarbon Resin | Modified Alkyd |
Pigment Type | Aluminum | Varies with Color |
Solvents | N-Butyl Acetate, VM&P Naphtha, Xylene | Acetone, Ketone blend |
Recommended Dry Film Thickness (DFT) per Coat |
1.0-2.0 mils (25-50µ) | 1.0-2.0 mils (25-50µ) |
Practical Coverage at Recommended DFT (assumes 15% material loss) |
10-15 sq. ft./can | |
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity |
30 minutes to touch. Recoat with an hour or after 48 | |
Dry Heat Resistance | 200ºF (94ºC) | |
Shelf Life | 5 Years | |
SFlash Point | -156ºF (-104ºC) | |
Safety Information | MSDS | |
Technical Data Sheet | Click here | Click here |