Rust-Oleum NeverWet Boot and Shoe Water Repellent Spray
Product Code: 280886
Have a question?
Rust-Oleum NeverWet Boot and Shoe Spray is a water repellent protect your shoes from water, mud, stains, and other liquids. This spray forms a crystal clear coating around the surface which repels liquids. This spray is ideal for using on boots, tennis shoes, casual shoes and more. As per the TDS from manufacturer, it is possible treat up to 20-60 square feet of area with one, however, it also depends on type of fabric or shoe.
Features of NeverWet Boot and Shoe
- Crystal clear coating.
- It can removed whenever you want.
- Suitable for canvas, nubuck, leather, suede etc.
- Ultimate coverage.
- Stain protector.
NOTE: For best result, read the instructions carefully that are printed on bottle.
This is How NeverWet Boot and Shoe Spray Works
Best Practices to Use NeverWet Boot and Shoe Spray
Spraying Conditions: Use outdoors or in a well ventilated area. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Articles must be clean and dry.
Application / Spraying: Do not shake. A test spray is recommended to obtain a feel for the spray pattern. Test in an inconspicuous area before application for colorfastness. NeverWet Boot & Shoe may enrich light material with a slightly darker tone. Rotate nozzle to “ON” position. Hold the spray bottle 8-12” from surface coating the entire boot or shoe until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply seasonally or when needed. Do not use near open flame.
Properties of NeverWet Boot and Shoe Water Repellent
|Practical Coverage at Recommended DFT
(assumes 15% material loss)
|Coverage will vary depending on fabric.
60 sq.ft. on smooth/light
fabrics, 20 sq.ft. on textured/heavy fabrics
|Dry Times at 70-80ºF (21-27ºC) and
50% Relative Humidity
|Varies depending on fabric
Allow to dry 24 hours before exposing to water
|Shelf Life||2 years|
|Flash Point||114°F (45°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|