Rust-Oleum Specialty Luminous Paint creates luminous effect in the dark for long when fully charged. This modified acrylic radium paint is ideal for using wood, metal, drywall and several other surfaces. This is perfect for decorative wall, doors, drawers’ fronts, toys and more. This product is also suitable to use for switches of lights so that they can be visible in the night or dark. This brush on glow in dark paint covers 8-14 square feet of area. It takes 45 minutes for drying to touch.NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Luminous Paint
- Fast drying latex based formula.
- Glows 2 times stronger than competitive brands.
- Suitable for interior decoration.
- Ideal for multiple surface.
NOTE: It is recommended to use over white or light colored surface.
How to Apply Glow In The Dark Luminous Paint?
Surface PreparationRemove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.
Priming for best results
Use of a Rust-Oleum white primer provides added corrosion protection, enhances adhesion and hiding, and is especially recommended for metal and wood surfaces. Recommended primers include 224430T Painters Touch Flat White Primer, American Accents Flat White Primer and 249058 Painters Touch White Primer.
Application of Paint
Apply only when air and surface temperatures are above 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 85% to ensure proper drying. Before using, mix thoroughly to ensure any settled pigment is re-dispersed. Thinning is not required. Avoid painting in direct sunlight or on hot surfaces. Use a good quality synthetic brush or ¼”- ⅜” nap roller. Avoid excessive brushing as this will reduce film thickness and protection. Use light even strokes to ensure smooth and uniform flow. Apply two coats 45 minutes apart to achieve maximum glowing effect.
Properties of Rust-Oleum Night Glow Luminous Paint
|Resin Type||Modified Acrylic Copolymer|
|Pigment Type||Modified Zinc Copper Chloride|
|Solvents||Propylene Glycol, Water|
Film Thickness (DFT) per Coat
|1.5-2.5 mils (37.5-62.5µ)|
|Practical Coverage at Recommended
DFT (assumes 15% material loss)
|Shelf Life||5 years|
|Flash Point||200°F (93°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|