Rust-Oleum American Accents Textured Stone Spray Paint is perfect to bring natural stone like look on surfaces such as wood, metal, ceramic and more. This stone effect spray paint is available in standout attractive finishes like black granite, bleached stone, gray stone, Tuscan rock etc. The coverage of this fast drying paint is 10-12 square feet.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Textured Stone Spray Paint
- Decorative spray paint.
- Dries in 15 minutes to touch.
- Available in the colors of natural stones.
- Cleans with soap and water.
NOTE: Apply clear top coat spray paint after 4 hours from the application, it will serve extra protection.
How to American Accents Textured Stone Spray Paint?
Ideal Conditions to Use
Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90ºF (10-32ºC) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces to create a surface profile.
Shake can vigorously for one minute before spraying. Can does not contain a mixing ball. DO NOT STRIKE CAN. Shake often during use. Hold can upright 10-16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.
Properties of American Accents Textured Stone Spray Paint
|Resin Type||Water-based Acrylic|
|Pigment Type||Varies with color|
|Recommended Dry Film Thickness
(DFT) Per Coat
|1.0-2.0 mils (25-50µ)|
|Practical Coverage at Recommended
DFT (assumes 15% material loss)
|Dry Times at 70-80°F (21-27°C)
and 50% Relative Humidity
|5 minutes to touch and re-coat any-time|
|Shelf Life||5 years|
|Flash Point||-156ºF (-104ºC)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|