Rust-Oleum 350 Fibered Black Roof Coating Paint
Product Code: 301999
Have a question?
Are you looking for waterproofing solutions for your roof? If yes, then use Rust-Oleum 350 Fibered Black Roof Coating Paint because it fulfills all the necessities which are required to protect terrace from water and weather. This is top quality asphalt-based paint which protects the surface from noxious effects of environment. This innovative paint enables you to protect the terrace surface via cold process. Truworth brings 350 Fibered Roof Coating from USA and provide the same at best price.
Specialties of 350 Black Roof Coating Paint
- You can apply it via spray or brush.
- Reinvigorate surface.
- Low temperature process.
- Top quality waterproof and weather proof paint for roof.
For Best Results: Before you apply, mix the solutions appropriately. The temperature of surface and atmosphere must be between 10-38ºC.
How to Use Rust-Oleum 350 Fibered Black Roof Coating Paint
Surface Preparation: The task is really important if you wish for long lasting results. For long lasting results, you should not skip this step. Remove all the dust, dirt, grease, oil, mold, loose, granules, rust etc. from the surface. Surface must be clean and sound and free. Clean surface always leads to paint adhesive. Thus, it will provide good adhesion to paint if you clean the surface through pressure wash. Before application, ensure that surface is completely dried or not.
Pumps Application: Graco King 45:1, Graco Bulldog 30:1 or gas powered equivalents. Graco GH733, HydraMax 350 or GMax 7900 or other manufacturers’ equivalents.
Hose/Pressure: 50’-300’ length (depending on spray rig pressure). When using hoses longer than 100’, use the next larger hose ID every 50’. Every 50’ of hose will reduce the spray pressure of the rig by 10% at the gun tip. i.e. 300’ hose - ¾” (50’/100’) to ⅝” (50’/100”) to ½” (50’/100’) to ⅜” (50’).
Gun:. Graco Contractor Gun, Graco Contractor FTx gun, Graco Silver Plus or equivalent. (Tip extrusions or pole guns can be used).