Rust-Oleum Varathane Water-Based Triple Thick Polyurethane for Interior - 946 ml
Product Code: 284470
Availability:Out of stock
Have a question?
Varathane Triple Thick Polyurethane is 3X thicker than a traditional polyurethane. It is an advanced self leveling formula that allows projects to be completed in one coat. This water-based formula provides excellent scratch and stain resistance. It also provides fast dry times as well as the convenience of soap and water clean-up. It is suitable for use on all interior wood surfaces including furniture, doors, trim and more. This product is not recommended for outdoor surfaces or floors.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of the Product
- Advanced self-leveling formula.
- Complete projects 3x faster.
- Ultimate durability in one coat.
- Soap and water clean-up (brush format) .
How to Apply Water-Based Triple Thick Polyurethane for Interior
Surface Preparation
Surface must be clean, dry and free from wax, grease, dust and other contaminants. Sand area smooth, progressing with sandpaper from 120 to 220 grit. Vacuum the surface to remove dust. Wipe surface with a clean, lintfree cloth.
Application
Stir before using or if product has been sitting longer than one hour. Do not shake. Use adequate ventilation at all times. Apply only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Apply using a high quality synthetic bristle brush. Apply in the direction of the wood grain in one, thick smooth uniform coat. If refinishing a previously coated surface or a second coat is desired, sand with 220 grit sandpaper.
Properties of Varathane Water Based Triple Thick Polyurethane for Interior
Brand | Varathane |
---|---|
Manufacturer | Rust-Oleum |
Resin Type | Polyurethane/Acrylic |
Pigment Type | Inorganic |
Solvents | Glycol Ethers and Water |
Weight | 946 ml |
Volatile Organic Compounds | 275 g/l 2.28 lbs./gal. |
Practical Coverage at Recommended DFT (assumes 15% material loss) |
50 sq.ft./quart |
Wet Film to Achieve DFT (unthinned material) |
9 mils (225µ) |
Recommended Dry Film Thickness (DFT) Per Coat |
3 mil (75µ) |
Dry Times at 70-80°F (21-27°C) and 50% RH |
2 hours to Touch 2 hours to Re-Coat 48 hours to Handle 7 days to Full Care |
Shelf Life | 3 years |
Flash Point | >200°F (93°C) |
Safety Information | For additional information, see MSDS |
Technical Data Sheet | Click here |